LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Front End) >> Repair Instructions >> Splash Shield Replacement - Engine - Right >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine splash shield to the lower flange of the engine compartment side rail.
  2. Align the holes in the engine splash shield to the holes in the outboard side engine compartment side rail.
  3. Insert the push-in retainers to the engine splash shield.
    4. Fig 1: Engine Splash Shield (Right)
    GM456714Courtesy of GENERAL MOTORS CORP.
  4. For the Impala, install the front fender liner. Refer to Front Fender Liner Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals