LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Body Front End) >> Repair Instructions >> Hood Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. NOTE: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
  3. Apply tape to the corners of the hood and the adjacent surfaces.
  4. Mark the upper hood hinge location to the hood with a grease pencil.
  5. Fig 1: View Of Hood Hinge & Bolts
    GM317815Courtesy of GENERAL MOTORS CORP.
  6. Remove the assist rods from the hood. Refer to Assist Rod Replacement - Hood .
  7. Remove the bolts from the upper hood hinge, with an assistant.
  8. Remove the hood from the vehicle with an assistant.