LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiper System And Washer System) >> Repair Instructions >> Washer Pump Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Drain the washer solvent from the washer solvent container.
  3. Remove the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  4. Disconnect the washer pump electrical connector.
    5. Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the washer pump hose.
  6. Use a small flat-bladed tool to remove the washer pump from the washer solvent container.
  7. Use a small flat-bladed tool to remove the seal from the washer solvent container.
scientia non olet · About LEMON Manuals