Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front End Sensor Components

Courtesy of GENERAL MOTORS CORP.

Install the front end sensor (1).

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the front end sensor - left fasteners (2).
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
Install the front end sensor - left electrical connector (3).
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1 .