LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the BPMV bracket into position in the vehicle.
    Fig 1: View Of BPMV Bracket
    GM1311227Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the master cylinder mounting nuts.

    Tighten:  Tighten the nuts to 27 N.m (20 lb ft).

  3. Install the EBCM/BPMV assembly to the mounting bracket.
    Fig 2: View Of EBCM/BPMV Assembly Mounting Bracket
    GM1311226Courtesy of GENERAL MOTORS CORP.
  4. Install the EBCM/BPMV assembly to mounting bracket bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals