LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Fluid Pressure Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    IMPORTANT: The area around the electronic brake control module (EBCM) must be free from loose dirt to prevent contamination of disassembled ABS components.
  1. Thoroughly clean all contaminants from around the EBCM.
  2. Disconnect the brake fluid pressure sensor electrical connector (3) from the brake fluid pressure sensor (2).
    3. Fig 1: Brake Fluid Pressure Sensor Electrical Connector
    GM773022Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake fluid pressure sensor (2) from the electronic brake control module (EBCM) (1).
scientia non olet · About LEMON Manuals