LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Bonneville SLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) -- 3.8L (L36 And L67) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: Accelerator Control Cable & Accelerator Pedal
    GM65171Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator control cable (1) from the accelerator pedal (2) lever.
    3. Fig 2: Accelerator Cable & Cover Tangs
    GM65179Courtesy of GENERAL MOTORS CORP.
  3. Squeeze the accelerator cable cover tangs and push the accelerator cable (1) through the bulkhead.
    4. Fig 3: Accelerator Control Cable, Retaining Clip & Washer Bottle
    GM65183Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator control cable (1) from the retaining clip (2).
  5. Remove the accelerator control cable (1) from the right slot on top of washer bottle (3).
    6. Fig 4: Accelerator Cable & Throttle Body Lever
    GM179148Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator cable (2) from the throttle body lever (3).
    7. Fig 5: Accelerator Control & Cable Bracket
    GM179152Courtesy of GENERAL MOTORS CORP.
  7. Remove the accelerator cable (1) from the accelerator control cable bracket (2).
scientia non olet · About LEMON Manuals