LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Lighting Systems) >> Repair Instructions >> Underhood Lamp Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Underhood Lamp Assembly
    GM64676Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Disconnect the electrical connector from the underhood lamp assembly.
    3. Fig 2: Rivets At Underhood Lamp Assembly
    GM64679Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  3. Drill out the 2 rivets retaining the underhood lamp assembly.
  4. Remove the underhood lamp from the vehicle.
scientia non olet · About LEMON Manuals