LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Rear Suspension System) >> Repair Instructions >> Spindle Rod Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: Exploded View Of Rear Suspension
    GM1210232Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use a transmission jack or suitable hoist stands to prop the rear suspension support.
  3. Lower the rear suspension support to gain clearance to the spindle rod to suspension support bolt. Refer to Support Replacement .
  4. Remove the bolt (1 or 2) and nut from the spindle rod and the rear suspension support.
    5. Fig 2: Trailing Arm To Knuckle Bolt & Nut
    GM1209586Courtesy of GENERAL MOTORS CORP.
  5. Remove the spindle rod to knuckle bolt and nut.
  6. Remove the spindle rod (1) from the vehicle.
scientia non olet · About LEMON Manuals