LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Vibe GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Self-Diagnostics >> Drive Cycles >> Inspection/Maintenance Complete System Set Procedure >> Test Description
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Description

The numbers below refer to the step numbers in the diagnostic procedures.

  1. 1  - Ensure you perform the I/M System Check before performing this test. Failure to do so may result in difficulty updating status to YES. See INSPECTION/MAINTENANCE SYSTEM CHECK .
  2. 2  - This step runs HO2S Heater Tests and initiate the EVAP System Test.
  3. 3  - This step is to run the catalyst test. The catalyst test runs during the specified cruise period.
  4. 4  - This step is to set up the Oxygen Sensor (O2S) tests. These tests run during the idle period immediately following a cruise period that meets a minimum calibrated RPM and time period.
  5. 5  - This step is to run the oxygen sensor tests and EVAP Tests. These tests run during the idle period immediately following a cruise period that meets a minimum calibrated RPM and time period.
  6. 6  - Perform individual system test for any systems that do not update to YES.
  7. 7  - I/M SYSTEM STATUS only reports on whether or not a diagnostic has run, not the outcome of the test. If any emission related DTC sets after the tests are complete, the DTC will require diagnosis.