LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Connect the electrical connector to the windshield wiper switch (2).
  2. Install the windshield wiper switch (2) to the column (6).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the retaining screw to the windshield wiper switch (2).

    Tighten 

    Tighten the screw to 4 N.m (38 lb in).

  4. Install the multifunction switch. Refer to MULTIFUNCTION, TURN SIGNAL SWITCH REPLACEMENT in Steering Wheel and Column.
  5. Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT in Steering Wheel and Column.
  6. Connect the negative battery cable.
  7. Ensure that the windshield wiper switch (2) functions properly.
    Fig 1: Installing Wipers/Washer Switch
    G01559012Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals