LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Lower Control Arm Bushings Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the lower control arm. Refer to LOWER CONTROL ARM REPLACEMENT  .
  2. Secure the lower control arm in a vice.

    Important:  The lower control arm vertical bushing MUST be installed in the same position which it was removed in order to maintain the original vehicle ride, handling and road feel.

  3. Mark the lower control arm along the flat edge of the bushing flange (1).
    Fig 1: Marking Lower Control Arm Along Flat Edge Of Bushing Flange
    G01499539Courtesy of GENERAL MOTORS CORP.

    Important:  Apply J23444-A  (or equivalent high pressure lubricant) to the threads of the J21474-27. 

  4. Assemble the following bushing tools as shown.
  5. Tighten the J21474-4  until the bushing is removed from the control arm.
  6. Disassemble the bushing tools.
    Fig 2: Assembling Bushing Tools
    G01499540Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals