LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1067 (Power Steering System) >> Repair Instructions >> Power Steering Gear Heat Shield Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Steering Gear Heat Shield & Mounting Bolts
    GM629007Courtesy of GENERAL MOTORS CORP.
  1. Install the steering gear heat shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering gear heat shield bolts.

    Tighten:  Tighten the steering gear heat shield bolts to 14 N.m (124 lb in).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals