LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Head Up Display Module Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the heads up display module.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts that secure the heads up display module to the IP.

    Tighten 

    Tighten the bolts to 2 N.m (18 lb in).

  3. Connect the electrical connectors.
  4. Install the IP upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek)  or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) .
    Fig 1: Installing Heads Up Display Module, Electrical Connectors, And Bolts
    G01721728Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals