October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Window Motor (Front): Removal
- Remove front door trim panel. See DOOR TRIM PANEL
.
- Remove water deflector.
- Disconnect window from window regulator carrier plate. See Figure
.
- Position window in full up position and tape it to window frame.
- Disconnect harness connector from window regulator motor.
- Loosen bolts on window regulator motor.
- Loosen bolts on window regulator rail.
- Remove front window regulator, lifting up and out from key slots on door inner panel and through rear access hole.