October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation: Radio: Installation
- Connect coaxial cable connector to radio.
- Connect electrical/audio harness connectors to radio.
- Install radio to instrument panel.
- Align radio control locator tab to instrument panel locator hole while carefully pressing radio into instrument panel until fully seated.
- Install radio screws. Tighten radio screws to 22 INCH lbs. (2.5 N.m).
- Install the instrument panel accessory trim plate.
- Perform radio set-up procedure. See RADIO SETUP under PROGRAMMING.