LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Door System, Mirror System & Window System) >> Repair Instructions >> Wiring Harness Replacement-Rear Door >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear door window to the full up position.
  2. Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door .
  3. Disconnect the rubber conduit from the rear door pillar.
  4. Disconnect the rear door wiring harness (1) at the rear door pillar.
  5. Disconnect the rubber conduit from the rear door.
    Fig 1: Disconnecting Rear Door Wiring Harness
    G01780349Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the rear door wiring harness from the rear door components.
  7. Disconnect the rear door wiring harness rosebuds from the rear door.
  8. Route the rear door wiring harness through the opening in the rear door and remove the rear door wiring harness from the rear door.
    Fig 2: Identifying Rear Door Wiring Harness Routing
    G01780350Courtesy of GENERAL MOTORS CORP.