LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Supplemental Inflatable Restraint System) >> Disabling & Activating Air Bag System >> Activating System
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Activating System

WARNING: This page is about a different car, the 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off and key is removed. Connect passenger side impact air bag module connector, located under passenger-side front seat. See Figure. Install Connector Position Assurance (CPA) clip.
  2. Connect passenger-side air bag module connector, located under glove box. See Figure. Install CPA clip. Connect driver side impact air bag module connector, located under driver-side front seat. Install CPA clip.
  3. Connect driver-side air bag module connector, located near base of steering column. See Figure. Install CPA clip. Install driver-side insulator panel. Install SRS fuse in junction block. Install center console accessory wiring junction block cover. Check system for proper operation. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals