LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 1998 >> Firefly (CANADA) L3-1.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> EGR Backpressure Transducer >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

EGR Backpressure Transducer: Service and Repair

EGR Back Pressure Transducer Replacement

Removal Procedure




1. Disconnect the three vacuum hoses from the exhaust gas recirculation (EGR) back pressure transducer.
2. Remove the EGR back pressure transducer from the retaining clips.

Installation Procedure




1. Install the EGR back pressure transducer to the retaining clips.
2. Connect the vacuum hose from the EGR bypass valve to port O of the EGR back pressure transducer.
3. Connect the vacuum hose from the EGR solenoid vacuum valve to port P of the EGR back pressure transducer.
4. Connect the exhaust port hose to the bottom port of the EGR back pressure transducer.
scientia non olet · About LEMON Manuals