Preliminary Check: Notes
- Incorrect operation of cruise control system may be caused by mechanical, electrical or vacuum system problems. Check for any codes. If any codes are present, see TESTS W/CODES article.
- Perform a visual inspection to ensure there are no bare, broken, or disconnected wires or any pinched, damaged or disconnected vacuum hoses. Start engine and check for vacuum at cruise control servo.
- Ensure servo and throttle linkage operate smoothly and servo cable is properly adjusted. Cruise Control Tester (J-34185-B) may be used for diagnosing electrical portion of cruise control system. If electrical system test specifies replacement of component, perform vacuum system testing before replacing component.
- Check cruise control switch wires for damage where they exit multifunction lever. If wires are pinched, replace multifunction lever. Perform initial symptom checks listed before proceeding to electrical system testing.