October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Transistor (Fuel Injected Models)
- Remove connector from power transistor. Using a DVOM, place positive lead of ohmmeter to terminal No. 2 and negative lead to terminal No. 3. See Figure
. Ensure there is no continuity.
- Using a 1.5 volt dry cell battery, connect positive end of 1.5 volt battery to transistor terminal No. 1 and negative end of 1.5 volt battery to transistor terminal No. 2. Place positive lead of DVOM to terminal No. 2 and negative lead to terminal No. 3 to ensure continuity is present. If DVOM does not respond properly, replace power transistor.