Removal Procedure

Fig 1: Front And Rear Bezel Covers

Courtesy of GENERAL MOTORS CORP.

Position the stem of a flat bladed tool at the rear bezel.
Push the rear bezel rearward 6 mm (1/4 in) and pull down on the handle in order to release the roof panel retaining tab.
Position the stem of a flat bladed tool at the inside edge of the front bezel assembly.

Fig 2: Stem Of Flat Bladed Tool At Rear Bezel

Courtesy of GENERAL MOTORS CORP.

Push the front bezel assembly forward 6 mm (1/4 in) and pull down on the handle in order to release the roof panel retaining tab.
Partially lower the headliner in order to expose the rear handle retaining tab (1).

Fig 3: Expose Rear Handle Retaining Tab

Courtesy of GENERAL MOTORS CORP.

Insert the tip of a flat bladed tool into the rear retaining tab (1).
With the retaining tab (1) released, pull down on the handle in order to release the roof panel tab from the bezel.
Remove the handle from the roof panel.

Fig 4: Handle From Roof Panel

Courtesy of GENERAL MOTORS CORP.

Partially lower the headliner in order to expose the front handle retaining tab (1).

Fig 5: Roof Panel Tab From Bezel

Courtesy of GENERAL MOTORS CORP.

Insert the tip of a flat bladed tool into the front retaining tab (1).
With the retaining tab (1) released, pull down on the handle in order to release the roof panel tab (2) from the bezel.
Remove the handle from the roof panel.
Rotate the bezels in order to release the bezel retaining tabs.
Remove the bezels from the headliner.