LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2002 >> Bravada 2WD L6-4.2L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Position (CMP) Sensor Replacement

REMOVAL PROCEDURE




1. Remove the camshaft position (CMP) sensor electrical connector (1).
2. Remove the CMP sensor retaining bolt.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the camshaft position (CMP) sensor.

Tighten
Tighten the CMP sensor bolt to 10 N.m (89 lb in).

2. Install the CMP sensor electrical connector (1).
scientia non olet · About LEMON Manuals