LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2001 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Power Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Use a small, flat-bladed tool to remove the lumbar control switch from the trim panel.
    Fig 1: Removing Lumbar Control Switch From Trim Panel
    G01833206Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (1) from the seat harness.
  4. Remove the switch from the seat.
    Fig 2: Disconnecting Electrical Connector From Seat Harness
    G01833207Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals