October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Electronic Brake Control Module: Installation
- To install, clean BPMV gasket surface with alcohol. Install NEW wave spring(s) in original location and position between EBCM and BPMV. Install EBCM to BPMV. Install 4 NEW top mounting screws and tighten in an "X" pattern. Install 2 NEW bottom screws and tighten. See TORQUE SPECIFICATIONS
.
- Connect pump motor connector at bottom of EBCM. Connect EBCM harness connector and push in lock tab. Turn ignition on, with engine off. Perform DIAGNOSTIC SYSTEM CHECK
under DIAGNOSIS & TESTING.