LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Reverse Servo >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Reverse Servo: Removal

  1. Remove the throttle body air inlet duct. Depress the reverse servo cover. See Fig 1 .
  2. Remove the snap ring. See Fig 2 . Pull the O-ring seal out through the slot in the case. Use side cutting pliers in order to cut the servo cover O-ring seal.
  3. Depress the reverse servo cover, grasp one end of the cut seal and pull the seal out of the servo cover.
  4. Remove the reverse servo cover. Remove the servo assembly. Remove the servo spring.
Fig 1: Removing & Installing Reverse Servo Assembly Cover
G00057600Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Reverse Servo Assembly
G00073385Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals