LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1998 >> Cutlass Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Anti-Lock Brake System) >> Bleeding Brake System >> Manual Bleeding >> TCS Modulator Assembly (Bleeding)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

TCS Modulator Assembly (Bleeding)

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure reservoir is full. Attach a clear hose to right side bleeder valve and submerge other end of hose in a container of clean brake fluid.
  2. Depress and hold brake pedal. Slowly open right side bleeder valve and allow fluid to flow. Close valve and release brake pedal. Wait 5 seconds, repeat procedure until no air bubbles are seen in hose. Repeat procedure for left side bleeder valve.
scientia non olet · About LEMON Manuals