Keyless Entry System - Remote: Programming
Turn ignition off. Connect fused jumper wire between Data Link Connector (DLC) terminals No. 8 (Black/White wire) and No. 4 (Black wire). Turn ignition on. Press and hold LOCK and UNLOCK button on one transmitter. Doors should lock and unlock. Remove jumper wire.
REMOTE KEYLESS ENTRY COMPONENT LOCATION
| Component | Location |
|---|---|
| Data Link Connector (DLC) | Under Left Side Of Instrument Panel |
| Rear Relay Center | Left Rear Passenger Compartment |
| RFA Module | Under Rear Shelf |