Keyless Entry Transmitter: Service and Repair

Transmitter Programming

Data Line Connector:

1. Turn ignition switch "Off."
2. Using a fused jumper, jumper Data Line Connector terminal 8 (BLK/WHT) to terirrrnal 4 (BLK).
3. Turn ignition switch "ON."
4. Press and hold "LOCK" and "UNLOCK" button on one transmitter Doors lock and unlock.
5. Repeat step 3 using the other transrnitter. If only one transmitter is being used go to step 4.
6. Disconnect jumper from DLC.