October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil Resistance
- Remove coil connectors and secondary coil wire. In test "A", use high ohmmeter scale. See Fig 1
. Resistance value should be very high (infinite). If reading is not infinite, replace coil.
- In test "B", use low ohmmeter scale. Reading should be very low (near zero ohms). If reading is not near zero ohms, replace coil. In test "C", use high ohmmeter scale. Continuity should exist. If no continuity exists, replace coil.
Courtesy of GENERAL MOTORS CORP.