LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1993 >> Achieva V6-3300 3.3L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

REMOVAL

1. Disconnect negative battery cable.
2. Raise vehicle.
3. Disconnect wiring harness connector from knock sensor.
4. Remove knock sensor from engine block.

INSTALLATION

1. Install knock sensor into engine block. Be sure threads are clean. Tighten to 19 N-m (14 lb.ft.). NOTE: Overtorquing can damage the knock sensor.
2. Reconnect wiring harness connector to the knock sensor.
3. Lower vehicle.
4. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals