October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pressure Relief Valve

Compressor And Clutch Assembly - Rear View:

Remove or Disconnect

1. Discharge the Refrigerant System.
2. Remove old pressure relief valve.

Install or Connect

1. Lubricate O-ring of new pressure relief valve and O-ring assembly with new 525 viscosity refrigerant oil. Install new valve and torque in place, 7.5-10.5 N.m (5.5-7.7 lbs.ft.).
2. Evacuate and recharge the system.
3. Leak test per system procedure.