LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2022 >> Armada SL, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (4 Of 5) >> Engine (ECM) >> DTC P1553: Battery Current Sensor >> Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Confirmation Procedure

  1. PRECONDITIONING 
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 8 V or more at idle.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start engine and let it idle for least 10 seconds.
    2. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals