LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Sentra SR >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System - Intelligent Key System >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation: Removal

  1. Remove shift selector finisher using the following steps:
    • CVT shift selector knob:
      • Slide the knob cover (1) down.
        GNSJSDIA3654Z-654Courtesy of NISSAN NORTH AMERICA, INC.
      • Pull out the lock pin (2).
      • Pull the shift selector knob (3) and knob cover upwards to remove.
      • Using a suitable tool, release clips and pawls.
        GNSALJIA0525Z-525Courtesy of NISSAN NORTH AMERICA, INC.

        SYMBOL : Pawl

        SYMBOL : Metal clip

    • M/T shift selector knob:
      • Using suitable tool (A), remove shift knob finisher (1).
        GNSALJIA0543Z-543Courtesy of NISSAN NORTH AMERICA, INC.
      • Remove shift knob (1) as shown, below.
        GNSALJIA0544Z-544Courtesy of NISSAN NORTH AMERICA, INC.
      • Using a suitable tool, release clips of shift selector finisher (1).
        GNSALJIA0545Z-545Courtesy of NISSAN NORTH AMERICA, INC.

        SYMBOL : Metal clip

  2. Remove shift selector finisher.
  3. Using a suitable tool release pawls and remove push-button ignition switch (1) from shift selector finisher (2).
    GNSALKIA1242Z-242Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
    NOTE: CVT shown; M/T similar
scientia non olet · About LEMON Manuals