LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Leaf S >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> Basic Inspection >> Additional Service When Replacing VCM >> After Work Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

After Work Procedure

Performing the following procedure can automatically activate recommunication of VCM and BCM, but only when the VCM is replaced with a new one*.

*: New one means a replacement VCM that has never been energized on-board.

(In this step, initialization procedure using CONSULT is not necessary)

NOTE:
  • When the replaced VCM is not brand new, the initialization of BCM using CONSULT is necessary.
  • If multiple keys are attached to the key holder, separate them before beginning work.
  • Distinguish keys with unregistered key IDs from those with registered IDs.
scientia non olet · About LEMON Manuals