LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Frontier PRO-4X >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Unit Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Removal

  1. Remove the center console rear base. Refer to Removal and Installation .
  2. Remove the yaw rate/side/decel G sensor bolts.
    CAUTION:
    • Do not use power tools to remove or install the yaw rate/side/decel G sensor.
    • Do not drop or strike the yaw rate/side/decel G sensor.
    NOTE: The location of the yaw rate/side/decel G sensor is the same for all models.
  3. Disconnect the harness connector from the yaw rate/side/decel G sensor.
  4. Remove the yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals