LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Altima SL, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Removal And Installation >> EVAP Control System Pressure Sensor >> AWD >> Removal & Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation: Removal

  1. Remove the center exhaust tube. Refer to Exploded View .
  2. Disconnect harness connector from EVAP control system pressure sensor.
  3. Release pawls and remove EVAP control system pressure sensor (1).
    GNSALBIA0456Z-456Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse O-ring when installing new EVAP control system pressure sensor. The EVAP control system pressure sensor and O-ring are serviced as an assembly.

    SYMBOL

    : Pawl
scientia non olet · About LEMON Manuals