Work Procedure: Procedure

CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES

GO TO 2.

NO

GO TO 4.

Replace lane camera unit. Refer to LANE CAMERA UNIT : Removal & Installation .

GO TO 3.

CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO 6.

Replace lane camera unit. Refer to LANE CAMERA UNIT : Removal & Installation .

GO TO 5.

CONSULT

1. Select "WRITE CONFIGURATION - Manual selection"
2. Touch "Next".
3. Touch "OK".
4. Check that the configuration has been successfully written and touch "End".

GO TO 6.

Confirm that LDW/I-LI systems operate normally.

• LDW : Refer to Work Procedure .
• I-LI : Refer to Work Procedure .

Work End.