July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Work Procedure

PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. TIRE AIR PRESSURE .
GO TO STEP 2 .

PERFORM CALIBRATION

With CONSULT
1. Turn ignition switch ON.
  CAUTION:
  Never start engine.
2. Select "Work Support" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
  CAUTION:
  Never swing the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?

YES

GO TO STEP 3 .

NO

Perform steps 1 and 2 again.

PERFORM THE SELF-DIAGNOSIS

With CONSULT
1. Turn ignition switch OFF and wait for 10 seconds.
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "TRANSMISSION".
Is "P1586" or "P1588" detected?

YES

Go to DTC INDEX .

NO

Calibration end