LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Brake System) >> Unit Disassembly And Assembly >> Front Disc Brake >> Disassembly And Assembly >> Inspection After Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection After Installation

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the drag of front disc brake. If any drag is found, follow the procedure described below.
  2. Remove brake pads.
  3. Using a suitable tool, press the pistons into the brake caliper body.
    CAUTION:

    Do not damage the piston boots.

  4. Install brake pads.
  5. Depress the brake pedal several times.
  6. Check the drag of front disc brake again. If any drag is found, disassemble the brake caliper body.
  7. Burnish contact surfaces after refinishing or replacing disc brake rotors or if a soft pedal occurs at very low mileage. Refer to BRAKE PEDAL .
scientia non olet · About LEMON Manuals