LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Versa Note SR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (3 Of 3) >> DTC/Circuit Diagnosis >> DTC P1564: ASCD Steering Switch >> DTC Logic >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn ignition switch ON.
    2. Wait at least 10 seconds.
    3. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
    4. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
    5. Press ACCEL/RES switch for at least 10 seconds, then release it and wait at least 10 seconds.
    6. Press COAST/SET switch for at least 10 seconds, then release it and wait at least 10 seconds.
    7. Check DTC.

    Is DTC detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals