LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Altima SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Driver Assistance System (ADAS Control Unit)) >> DTC/Circuit Diagnosis >> DTC C1A34: Command Error >> DTC Description >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DTC PRIORITY

    If DTC "C1A34" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES 

    Perform diagnosis of applicable. Refer to DTC DESCRIPTION .

    NO 

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION PROCEDURE

    G-20 CONSULT

    1. Start the engine.
    2. Operate the ICC system and drive.
      CAUTION:

      Always drive safely.

    3. Stop the vehicle.
    4. Perform "All DTC Reading" mode.
    5. Check if "C1A34" is detected as the current malfunction in "Self Diagnostic Result" mode of "ICC/ADAS".

    Is "C1A34" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals