Component Function Check
WARNING: This page is about a different car, the 2017 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before performing the diagnosis, check that the following is normal:
- Battery saver output/power supply
- Step lamp bulbs
- CHECK STEP LAMP OPERATION
CONSULT
- Turn ignition switch ON.
- Select "STEP LAMP" in "Active Test" of "BCM (INT LAMP)".
- While operating the test item, check that step lamps turn ON/OFF.
ON : Step lamp ON OFF : Step lamp OFF
Is the inspection result normal?
YES
Step lamp circuit is normal.
NO
Refer to DIAGNOSIS PROCEDURE .