Outline Of Radar Alignment Procedure

A 4-wheel vehicle alignment must be performed before proceeding with radar alignment procedure.
Always perform the radar alignment after removing and installing or replacing the Distance sensor.
If the Distance sensor was removed and installed or replaced, first perform Distance Sensor Initial Vertical Alignment, refer to DESCRIPTION .

CAUTION:

The system does not operate normally unless the Distance sensor is aligned properly.

Required tools, refer to REQUIRED TOOLS .
Preparation, refer to PREPARATION .
Vehicle set up, refer to VEHICLE SET UP .
Setting the Distance sensor target board, refer to SETTING THE DISTANCE SENSOR TARGET BOARD .
Distance sensor adjustment, refer to DISTANCE SENSOR ADJUSTMENT .