LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Altima Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC B210B: Starter Control Relay >> DTC Logic >> DTC Detection Logic
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Detection Logic

NOTE:
  • If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B210B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210B START CONT RLY ON When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 1 second or more:
  • Starter control relay signal (CAN) from BCM.
  • Starter relay status signal (CAN) from BCM.
  • Starter control relay and starter relay status signal (IPDM E/R input).
  • Starter control relay control signal (IPDM E/R output).
  • IPDM E/R
scientia non olet · About LEMON Manuals