Diagnostic Test
- VDC OFF INDICATOR LAMP OPERATION CHECK 1
Check that the lamp illuminates for approximately 3 seconds after the ignition switch is turned ON.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .
- VDC OFF INDICATOR LAMP OPERATION CHECK 2
Check that the VDC OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the VDC OFF switch.
Is the inspection result normal?
YES
INSPECTION END
NO
Check the VDC OFF switch. Refer to COMPONENT INSPECTION .