FOR MEXICO: Precautions for Removing of Battery Terminal

When removing the 12V battery terminal, turn OFF the ignition switch and wait at least 30 seconds.
NOTE: ECU may be active for several tens of seconds after the ignition switch is turned OFF. If the battery terminal is removed before ECU stops, then a DTC detection error or ECU data corruption may occur.
For vehicles with 2 batteries, be sure to connect the main battery and the sub battery before turning ON the ignition switch.

Fig 1: Disconnecting Battery Negative Terminal
Courtesy of NISSAN NORTH AMERICA, INC.

NOTE: If the ignition switch is turned ON with any one of the terminals of main battery and sub battery disconnected, then DTC may be detected.
After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE: The removal of 12V battery may cause a DTC detection error.