LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Leaf S >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (EV Control System (Introduction)) >> System Description >> Diagnosis System (VCM) >> CONSULT Function >> Function
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CONSULT Function: Function

WARNING: This page is about a different car, the 2013 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic test mode Function
ECU Identification VCM part number can be read.
Self-diagnostic result*1 Self-diagnostic results and freeze frame data can be read and erased quickly.*2
Data monitor Input/Output data in VCM can be read.
Active test Diagnostic Test Mode in which CONSULT drives some actuators apart from VCM and also shifts some parameters in a specified range.
Work support This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT.
Load battery ID Refer to "Li-ion Battery ID Registration Operation Manual".
(1) DTC P0AA1 is not cleared even when "Self-diagnostic Result" is cleared. To clear DTC P0AA1, perform "SPECIFIC DTC CLEAR" in "WORK SUPPORT".
(2) The following diagnosis information is cleared when the VCM memory is erased.
  • Diagnostic trouble codes
  • Freeze frame data
  • Applicable operational history and count
scientia non olet · About LEMON Manuals