LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> DTC/Circuit Diagnosis >> Power Window Motor >> Driver Side >> DRIVER SIDE: Diagnosis Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DRIVER SIDE: Diagnosis Procedure

  1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) INPUT SIGNAL 
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor (driver side) connector.
    3. Turn ignition switch ON.
    4. Check voltage between front power window motor (driver side) harness connector and ground.
      (+) (-) Condition Voltage (V)
      Front power window motor (driver side)
      Connector Terminal
      D37 2 Ground Power window main switch (driver side) NEUTRAL 0 - 1
      UP 9 - 16
      3 NEUTRAL 0 - 1
      DOWN 9 - 16

      Is the inspection result normal? 

      YES: Replace front power window motor (driver side).

      NO: GO TO 2.

  2. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector.
    3. Check continuity between front power window motor (driver side) harness connector and power window main switch harness connector.
      Front power window motor (driver side) Power window main switch Continuity
      Connector Terminal Connector Terminal
      D37 2 D35 17 Existed
      3 19
    4. Check continuity between front power window motor (driver side) harness connector and ground.
      Front power window motor (driver side) Ground Continuity
      Connector Terminal
      D37 2 Not existed
      3

      Is the inspection result normal? 

      YES: Replace power window main switch. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

scientia non olet · About LEMON Manuals