Component Inspection
- CHECK EOP SENSOR
- Turn ignition switch OFF.
- Disconnect EOP sensor harness connector.
- Check resistance between EOP sensor connector terminals.
EOP sensor Condition Resistance (kΩ) + - Terminal 1 2 None 4 kΩ - 10 kΩ 3 2 kΩ - 8 kΩ 2 1 4 kΩ - 10 kΩ 3 1 kΩ - 3 kΩ 3 1 2 kΩ - 8 kΩ 2 1 kΩ - 3 kΩ Is the inspection result normal?
YES: INSPECTION END.
NO: Replace EOP sensor. Refer to "EXPLODED VIEW ".